Page 1 of 1
Janisol Primo
With only 60 mm installation depth, the thermally broken steel profiles achieve excellent thermal insulation values and make an active contribution to environmentally compatible sustainable building. The assembly and manufacture of Janisol Primo and combination with Janisol systems are simplified by the use of identical profile cross sections.
11 October, 2019
Janisol Arte 66
With Janisol Arte 66, Jansen is expanding its range of systems to include an attractive variation. The basic depth of 66 mm enables the use of stronger glass, with a vent height of up to 2300 mm. This makes it possible to have the turn/tilt opening type, even with the special requirements of listed buildings for narrow frames. With the concealed fittings, they meet architects’ and developers’ demands for a uniform design and clear lines which do not allow any visual interruption. The Euro grooves make it easier for fabricators to install the fittings, while the new glazing bead system facilitates installation of the panes. Fabrication with push-in gasket or dry glazing takes place in the usual way, as with the Janisol and Janisol Arte 2.0 steel profiles – this ensures a high level of process reliability.
VISS SG/SemiSG
VISS Basic and VISS Ixtra are cost-effective and aesthetic system solutions for facade construction and can be mounted on any support. The system construction is based on the proven VISS system. Thanks to this system, very large span facades can be achieved. The choice of the shape and material of the loadbearing construction is unrestricted by the glazing.
20 May, 2019
VISS Skylight
Welded steel construction plays to its strengths in sloping glazing. Ultra-slimline profiles also allow designers to create large roof lights. The TVS sealing principle is perfect for sloping glazing applications but can also be easily combined with VISS vertical facades. Just as in loadbearing constructions, the same seal can be installed to run continuously from a sloping to a vertical inclination.
VISS Fire Skylights
Welded steel construction comes into its own in sloping glazing in the event of a fire. The well-designed, high-quality VISS Fire system with its wide range of additional components, such as fire-proof anchors, stainless steel clamping sections etc., prevents the spread of fire and smoke in the event of a fire. VISS Fire has a number of country-specific approvals, to which more are continuously being added through further tests.
17 May, 2019
VISS Fire Facade
The VISS Fire system with a wide range of additional components, such as fire-proof anchors, stainless steel clamping sections etc. keeps the glass in the right position in the event of fire and prevents this way the entry of fire and smoke. Numerous projects and a host of international tests and approvals in classes E30, EI30, EI60, EI90 attest the reliability of VISS Fire with respect to thermal insulation and fire protection.
VISS Facades
VISS TVS is a highly insulated system with a Passivhaus certificate and is suitable for a wide range of applications in new or existing buildings. The panel sizes and infill element thicknesses are selected from the system modules to meet the structural engineering requirements and provide the most technically and economically suitable components. The proven sealing system can be combined with customised VISS and VISS Ixtra profiles or with ordinary steel and stainless steel supporting sections.
VISS Basic Skylight
Welded steel construction plays to its strengths in sloping glazing. VISS Basic and VISS Ixtra are cost-effective and highly aesthetic system solutions for roof constructions and can be mounted on any support. The free choice of supporting profiles allows the design of large span rooflights.
VISS Basic Facade
VISS Basic and VISS Ixtra are cost-effective and aesthetic system solutions for facade construction and can be mounted on any support. The system construction is based on the proven VISS system. Thanks to this system, very large span facades can be achieved. The choice of the shape and material of the loadbearing construction is unrestricted by the glazing.
Jansen Art15
With the same aesthetic as Janisol Arte, Art 15 offers with extremely slim profiles the best solution for high tech design architectural interiors. With 50 mm depth and multiple opening solutions, this system will delight the most demanding clients.
Janisol Window
The slender profile face widths of Janisol windows provide the space for creativity and lend the building a quite special character. Whether it is sash bar variants, arched windows or large-glazed elements: the Janisol window system is particularly suitable for use in new buildings as well as for the refurbishment of existing buildings.
Janisol Door
Thanks to its highly resistant material characteristics, steel is perfect for highly frequented buildings such as schools, hospitals, sports centres and the like thanks. Stainless steel adds a graceful look and reduces maintenance to a minimum. Janisol stainless steel is therefore the right choice for shopping malls, railway stations, banks and hotels.
Janisol HI Window
Janisol HI system sets new standards in thermal insulation. Triple glazing windows achieve an excellent coefficient of thermal transmittance of up to Uw 0.69 W/m2K (for fixed lights) and up to Uw 0.8 W/m2K (for windows). Thanks to the high-tech insulating bars made from glass fibre-reinforced polyurethane, the new window system also achieves excellent static values and its performance has been highly confirmed in numerous tests (air/water/wind).
Janisol HI Liftable
The Janisol lift-and-slide door range redefines living space. This proven system, which was developed especially for large openings, allows indoor and outdoor spaces to merge and create a unique, open living ambiance. The threshold at the bottom is made of high-grade, glassfibre-reinforced plastic and provides an access to meet the needs of the disabled while ensuring excellent thermal insulation. Janisol lift-and-slide doors are compliant with the CE marking requirements and have been tested at ift Rosenheim.
Economy 50 Window
With an installation depth of only 50 mm, the Jansen Economy 50 profile system is suitable for slender, elegant window designs without thermal insulation. Tested systemised fittings and fixtures are available for all common opening types.
Janisol Faltwand / Retractable
Janisol folding doors are based on the Janisol insulated system and have a multitude of applications. They can be used as a room divider or to provide access to exterior space. The proven system, developed specially for flexible openings, can be used for inward- or outward-opening doors. Ultra-slimline steel profiles and narrow face widths result in robust, resilient and durably strong folding doors.
Janisol C4 EI120
Through the use of ceramic filling technology and its combination with a complementary profile, Janisol EI120 system achieve the necessary space for the EI120 glasses. With a depth of 100 mm, JANSEN offers fire rated systems for 120 minutes with the aesthetics and quality of a Swiss product.
Janisol C4 EI60/EI90
Jansen has put the advantages of ceramic to good use. The result is fire protection doors that combine strength with the highest fire protection characteristics. The innovative fire protection infill panels can achieve up to an E190 fire resistance class with an installation depth of only 70 mm.
Janisol Arte Sliding Door
Janisol Arte sliding range combines the slenderness of the profiles of Janisol Arte series with the large glazed surfaces that allow a material such as steel. The sliding opening makes it possible to interconnect spaces in a simple way.
Janisol Art
This profile series was specially developed for the refurbishment of industrial and loft glazing as well as heritage windows. Typically finely proportioned windows in the Bauhaus style can be almost perfectly reconstructed with the extremely ultra-slimline, thermally broken profiles. Slim profiles aesthetically with the same appearence as Janisol Arte not thermally broken.
Janisol 2 EI30
Janisol 2 EI30 combines the legal requirements for structural safety with design freedom. The material properties of steel allow extremely slimline steel profiles to be assembled into strong and safe constructions. The result here is multifunctional doors that satisfy the requirements of both the architect and the client. The performance of the system has been internationally confirmed in numerous fire tests. Janisol 2 has been tested in combination with products from many different glass suppliers
Janisol 1 E45/EW45
Finally a Fire Rated window system! With Janisol 1 system, identical in aesthetic to a Janisol window, fire rated performance of up to EW45 is achieved
Economy 60 Door
Thanks to a greater installation depth and wall thickness, the Jansen-Economy 60 system is particularly suitable for large, heavily loaded single- and double-leaf door elements and for applications requiring higher levels of security.
Economy 50 Door
Jansen-Economy 50 is the profile system for flush door constructions without thermal insulation. The simple profile shapes ease the task of assembly. The wide range offers room for creative and cost-effective solutions.
16 May, 2019
ArtSystem
Art System is a combination of the Economy window and Art 15 series, achieving a fantastic serie of windows. Profiles without thermal break with exceptional aesthetics, having the most slender profiles on the market.
Economy 60 E
Fire protection doors to class E30 and fixed glass panels up to class E120 can be manufactured quite easily and simply using the popular Economy profiles with 60 mm depth. Jansen-Economy doors have the same appearance as the Janisol fire protection system components.
Economy 50 E
Fire protection doors to class E30 and fixed glass panels up to class E120 can be manufactured quite easily and simply using the popular Economy profiles with 50 mm depth. Jansen-Economy doors have the same appearance as the Janisol fire protection system components.
Janisol 2 EI30 Sliding Door
The sophisticated fire protection sliding door concept impresses as much by functionality as by aesthetics with its extremely slender frame profiles. Successfully tested in accordance with European fire protection standards, the door profile system ensures the highest safety, even under extreme loads, and offers plenty of design options with a wide choice of drive motors and glass types. The variable Janisol 2 EI30 fire protection sliding doors are mainly used in barrier-free buildings with higher security requirements, such as shopping centres, stadiums and administration buildings. The ultra-slim fire protection profiles make these sliding doors simple to fabricate as single- and double-leaf systems with or without an integrated emergency exit function.
Falttore
Jansen steel profiles create large-area and torsion-resistant door systems with slender frames. The ranges of profiles and seals are suitable for manual and automatic doors. The Jansen folding and sliding door system is compliant with the CE marking requirements and fulfils the requirements of product standard EN 13241-1.
Janisol HI Door
Janisol HI system sets new standards in thermal insulation. Triple glazing doors achieve an excellent coefficient of thermal transmittance of UD 1.0 W/m2K. Thanks to the high-tech insulating bars made from glass fibre-reinforced polyurethane, the new door system achieves excellent static values and its performance has been highly confirmed in numerous tests (air/water/wind/mechanics).
8 May, 2019
Page 1 of 1